manualshive.com logo in svg

Cisco IEC 4610, User Manual

Share
Download
Cisco IEC 4610 User Manual Download Page 107

C H A P T E R

5-1

Cisco Interactive Experience Client 4600 Series User Guide

5

Upgrading the IEC

Revised: April 3, 2015

Chapter Overview

This chapter identifies how to upgrade the firmware.

Both methods of upgrading explained here are intended for incremental upgrades. The IEC’s settings 
will not be modified using either method.

Topics in this chapter include:

  •

IEC Firmware Upgrade Using the IEM, page 5-1

  –

Saving XML Files, page 5-8

  •

IEC Firmware Upgrade Using the Terminal Utility, page 5-10

Warning

Before upgrading an IEC to the latest version, ensure that the software version of the IEM is the latest 
too.

IEC Firmware Upgrade Using the IEM

You will need the following files that can be downloaded from 

www.cisco.com

:

  •

System file

  •

Application file

  •

Specification file

Tip

It is recommended that only one version is active.

Step 1

In the left pane of the IEM, click 

Maintenance

.

Summary of Contents for IEC 4610









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands