2-15
Cisco IE 4000 Switch Hardware Installation Guide
Chapter 2 Switch Installation
Connecting to Power
Figure 2-6
Inserting Wires in the Power Connector
Step 7
Use a ratcheting torque flathead screwdriver to torque the power connector captive screws (above the
installed wire leads) to 5in-lb (0.565 Nm). See
Figure 2-7
.
Caution
Do not over-torque the power connector’s captive screws. The torque should not exceed 5in-lb (0.565
Nm).
1
Power source positive connection
2
Power source return connection
33
2021
1
2
