Cisco IE 3010, Installation Instructions Manual

Page: 12 / 30

28
Switch Installation
Installing the Switch
Attaching Brackets for ETSI Racks
Figure 18 Attaching Brackets for ETSI Racks
Note: For IP-30 compliance: If you use ETSI brackets, you can insert the rubber plugs in the same holes as shown in
Figure 13 on page 23 or Figure 14 on page 24 before installing the brackets.
Rack-Mounting the Switch
After you attach the brackets on the switch, use the four supplied number-12 Phillips machine screws to attach the
brackets to the rack. See
Figure 19 on page 29 .
1 Phillips flat-head screws 3 Power-supply-side mounting position
2 Cable-side-mounting position
C isco CG S 2
520
C isco CG S
2520
C isco CG S
2520
279174
2
3
3
1
1
1
1
1
2
2