Cisco IAD2801 Series, Installation Manual

Page: 73 / 79

B-7
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
OL-12433-01
Appendix B Installing and Upgrading Internal Modules
Installing the Chassis Cover
Installing the Cover on Cisco IAD2801 Series Integrated Access Devices
To install the chassis cover on a Cisco IAD2801, follow these steps:
Step 1 Slide the top cover of the router back on the bottom of the chassis by pushing it in the direction opposite
than shown in
Figure B-3 on page B-4 , “ Removing the Cisco IAD2801 Chassis Cover .”
Step 2
Replace the three screws and the ground connection that you removed when you opened the chassis. See
Figure B-1 on page B-3 , “ Removing the Cisco IAD2801 Chassis Cover .”