USB 3.0 Type A (USB 2)
You can connect a keyboard, and along with a
monitor on the VGA port, you can access the
console.
2
USB 3.0 Type A (USB 1)
You can connect a keyboard, and along with a
monitor on the VGA port, you can access the
console.
1
eth1 management interface (labeled 2)
Gigabit Ethernet 100/1000/10000 Mbps interface,
RJ-45, LAN2
4
eth0 management interface (labeled 1)
Supports 100/1000/10000 Mbps depending on
link partner capability.
3
CIMC interface (labeled M)
Supported
only
for Lights-Out Management
access.
6
VGA video port (DB-15 connector)
5
Unit identification button
8
Serial console port (RJ-45 connector)
Disabled by default.
7
770-W AC power supply (PSU 2)
10
770-W AC power supply (PSU 1)
9
eth2 management interface
10-Gigabit Ethernet SFP+ support
SFP-10G-SR and SFP-10G-LR are qualified for
use on the FMC.
12
Threaded holes for dual-hole grounding lug
11
Riser handle
Not supported
14
eth3 management interface
10-Gigabit Ethernet SFP+ support
SFP-10G-SR and SFP-10G-LR are qualified for
use on the FMC.
13
Front Panel LEDs and their States
The following figure illustrates the front panel of the FMC 1600, 2600, and 4600, identifies the LED lights,
and provides the information you need to determine appliance status based on the LEDs. The FMC 2600 has
four SAS drives, and the FMC 4600 has six SAS drives, each with the same drive fault and drive activity
LEDs as shown in the diagram. For information on all the front-panel features, see the
Management Center 1600, 2600, and 4600 Hardware Installation Guide
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
2
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Front Panel LEDs and their States
