Cisco Firepower Management Center 1600, 2600,
and 4600 Getting Started Guide
First Published:
2019-06-26
Last Modified:
2021-02-19
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started
Guide
The
Firepower Management Center (FMC) 1600, 2600, and 4600 Getting Started Guide
explains FMC
installation, login, setup, initial administrative settings, and configuration for your secure network. This
document also describes maintenance activities such as establishing alternative means of FMC access, adding
managed devices to the FMC, FMC factory reset, saving and loading configurations, erasing the hard drive,
and performing an appliance shutdown or restart.
In a typical deployment on a large network, you install multiple managed devices on network segments. Each
device controls, inspects, monitors, and analyzes traffic, and then reports to a managing FMC. The FMC
provides a centralized management console with a web interface that you can use to perform administrative,
management, analysis, and reporting tasks in service to securing your local network.
About the Firepower Management Center Models 1600, 2600, and 4600
The following topics provide information about front and rear panel features that you need to follow the
instructions in this document.
Rear Panel Features
The following figure illustrates the rear panel of the FMC 1600, 2600, and 4600. For more information on
the rear-panel features, see the
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation
Figure 1: Rear Panel
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
1
