manualshive.com logo in svg

Cisco Firepower 1600, Hardware Installation Manual

Share
Download
Cisco Firepower 1600 Hardware Installation Manual Download Page 18

4600

2600

1600

Specification

5.8 Bels (measure A-weighted per ISO7779 LWAd)

Operation at 73°F (23°C)

Sound power level

43 dBa (measure A-weighted per ISO7779 LpAM)

Operation at 73°F (23°C)

Sound pressure level

Product ID Numbers

The following table lists the field-replaceable PIDs associated with the FMC 1600, 2600, and 4600. The spare
components are ones that you can order and replace yourself. If any internal components fail, you must RMA
the entire chassis including the SFPs and SFP cables. Remove the drives and power supplies before you send
the chassis for RMA.

Table 4: FMC 1600, 2600, and 4600 PIDs

Description

PID

AC power supply

FMC-M5-PS-AC-770W

AC power supply (spare)

FMC-M5-PS-AC-770W=

FMC 1600 and 4600 1.2-TB hard disk drive

FMC-M5-HDD-1.2TB

FMC 1600 and 4600 1.2-TB hard disk drive (spare)

FMC-M5-HDD-1.2TB=

FMC 2600 600-GB hard disk drive

FMC-M5-HDD-600G

FMC 2600 600-GB hard disk drive (spare)

FMC-M5-HDD-600G=

Rail kit

UCSC-RAILB-M4

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the FMC 1600, 2600, and 4600. The jumper power cords for use in racks are available as an
optional alternative to the standard power cords.

If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.

Only the approved power cords and jumper cords provided with the FMC 1600, 2600, and 4600 are supported.

Note

The following power cords and jumper cords are supported.

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide

14

Overview

Product ID Numbers

Summary of Contents for Firepower 1600













































Reviews:

No comments

Brands by name

Popular brands

Load more brands