C H A P T E R
10
Access the Expressway User Interface
•
Access the Expressway User Interface, on page 29
Access the Expressway User Interface
This section describes how to access the Expressway web and CLI user interfaces. The interfaces are enabled
through the Install Wizard.
Using the Web UI
To log into the web user interface:
1.
Open a browser window and in the address line type one of the following:
• IP address of the Cisco Expressway (for example,
https://10.0.0.1
). Enter the address as HTTPS.
• FQDN of the Cisco Expressway (for example,
https://mydomain.example.com
).
2.
In the
Login
page, select
Administrator login
.
3.
Login with username
admin
and your system password.
4.
The Expressway
Overview
page is displayed.
More information
Detailed information about configuring and managing Expressway, including each page in the interface, is
provided in the Expressway online help and in the
Cisco Expressway Administrator Guide
Using the CLI
The command line interface is available over SSH and through the serial port by default:
1.
Start an SSH session.
2.
Enter the IP address or FQDN of the Cisco Expressway.
3.
Log in with username
admin
and your system password.
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
29
