background image

20

FCC Compliance

United States FCC Compliance

This device has been tested and found to comply with the limits 
for a Class B digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
such interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy. If 
not installed and used in accordance with the instructions, 
it may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment OFF and ON, the user is 
encouraged to try to correct the interference by one or more of 
the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and 
 receiver.

•  Connect the equipment into an outlet on a circuit diff erent
  from that to which the receiver is connected.

•  Consult the service provider or an experienced radio/television 
  technician for help.

Any changes or modifi cations not expressly approved by Cisco 
Systems, Inc., could void the user’s authority to operate the 
equipment.

The information shown in the FCC Declaration of Conformity 
paragraph below is a requirement of the FCC and is intended to 
supply you with information regarding the FCC approval of this 
device. 

The phone numbers listed are for FCC-related questions 

only and not intended for questions regarding the connection or 
operation for this device. Please contact your service provider 
for any questions you may have regarding the operation or 
installation of this device.

 Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is 
subject to the following two conditions: 1) the device may not 
cause harmful interference, and 2) the device must accept any 
interference received, including interference that may cause 
undesired operation.

Explorer 8640HDC, 8642HDC, 8650HDC,

and 8652HDC Set-Tops

Models: 8640HDC, 8642HDC, 8650HDC and 8652HDC

Manufactured by: Cisco Systems, Inc. 

5030 Sugarloaf Parkway 

Lawrenceville, Georgia 30044 USA

Telephone: 

678 277-1120

Canada EMI Regulation

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la class B est conforme à la norme 
NMB-003 du Canada.

20081121 FCC Standard

Software and Firmware Use

The software described in this document is protected by 
copyright law and furnished to you under a license agreement. 
You may only use or copy this software in accordance with the 
terms of your license agreement.

The fi rmware in this equipment is protected by copyright law. 
You may only use the fi rmware in the equipment in which it is 
provided. Any reproduction or distribution of this fi rmware, or any 
portion of it, without our express written consent is prohibited.

ROVI CORPORATION COPYRIGHT NOTICE

This product incorporates copyright protection technology that is 
protected by U.S. patents and other intellectual property rights 
of Rovi Corporation. Use of this copyright protection technology 
must be authorized by Rovi Corporation, and is intended for home 
and other limited viewing uses only unless otherwise authorized 
by Rovi Corporation. Reverse engineering and disassembly are 
prohibited.

Disclaimer

Cisco Systems, Inc. assumes no responsibility for errors or omissions 
that may appear in this guide. We reserve the right to change 
this guide at any time without notice.

AVC VIDEO LICENSE

With respect to each AVC/H.264 product, we are obligated to 
provide the following notice:

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT 
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A 
CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE 
REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH 
THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC 
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A 
PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO 
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE 
IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. 
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG 
LA, L.L.C. SEE 

HTTP://WWW.MPEGLA.COM

.

Accordingly, please be advised that service providers, 
content providers, and broadcasters may be required 
to obtain a separate use license from MPEG LA prior 
to any use of AVC/H.264 encoders and/or decoders.

Summary of Contents for Explorer 8640HDC





























Reviews: