
IP Configuration: RIPv2
Configuring RIP
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
352
18
Creating an Access List
To set the global configuration of an access list.
STEP 1
Click
IP Configuration
>
Access List
>
Access List Settings
.
STEP 2
To add a new Access List, click Add to open the Add Access List page and enter
the following fields:
•
Name
—Define a name for the access list.
•
Source IPv4 Address
—Enter the source IPv4 address. The following
options are available:
-
Any
—All IP addresses are included.
-
User Defined
—Enter an IP address.
•
Source IPv4 Mask
—Enter the source IPv4 address mask type and value.
The following options are available:
-
Network Mask
—Enter the network mask.
-
Prefix Length
—Enter the prefix length.
•
Action
—Select an action for the access list. The following options are
available:
-
Permit
—Permit entry of packets from the IP address(es) in the access
list.
-
Deny
—Reject entry of packets from the IP address(es) in the access list.
Populate an Access List
To populate an access list with IP addresses.
STEP 1
Click
IP Configuration
>
Access List
>
Source IPv4 Address List
.
STEP 2
To modify the parameters of an access list, click Add to open the Edit Access List
page and modify any of the following fields:
•
Access List Name
—Name of the access list.
•
Source IPv4 Address
—Source IPv4 address. The following options are
available: