Cisco DX650 Administration Manual Download Page 119

Page: 119 / 230

Use the touchscreen to configure the WLAN settings on Cisco Desktop Collaboration Experience.

Note

For information about how to access the Wireless & Networks settings menu, see the

Display Setup Menu,

on page 100

Table 22: Wireless & Networks Settings Menu

To select or change

Description

Option

Toggle between OFF and ON to disable
or enable Wi-Fi connection. See the

Wi-Fi Settings Menu, on page 101

Enables or disables Wi-Fi. Sets up and
manages wireless access points.

Wi-Fi

Toggle between OFF and ON to disable
or enable Bluetooth. See the

Bluetooth

Settings Menu, on page 103

Enables or disables Bluetooth. Sets up and
manages Bluetooth connections, device
names, and discoverability.

Bluetooth

Displays data usage by Wi-Fi and
Ethernet.

Data usage

See the

TFTP Server Settings Menu, on

page 104

Sets up and manages TFTP server
information.

TFTP server settings

See the

Ethernet Settings Menu, on page

105

Sets up and manages wired access.

Ethernet settings

See the

VPN Menu Options, on page

109

Sets up and manages Virtual Private
Networks (VPNs).

VPN

Allows you to reset the network settings
to factory defaults.

Reset network settings

Wi-Fi Settings Menu

The following table describes the Wi-Fi settings and, where applicable, explains how to change them.

Table 23: Wi-Fi Settings Menu

To select or change

Description

Option

Wi-Fi settings

Tap to enable or disable Wi-Fi connection.

Enables or disables Wi-Fi.

Wi-Fi

Tap a network to access it.

Displays Wi-Fi networks.

List of WI-Fi
networks

Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)

101

Wireless and Networks Settings Menu

Summary of Contents for DX650







































































































































































































































Search results

Summary of Contents for DX650

Reviews:

Cisco DX650, Administration Manual, Page: 119 / 230

Search results

Summary of Contents for DX650

Reviews: