Cisco DVR, Configuration Manual

Page: 48 / 68

Chapter 3 Testing DVR Services
40 4011411 Rev B
Testing DVR Services
This section provides detailed instructions for each of the following tasks required to
test DVR services:

Provision a DVR for the service as described in Provisioning a DVR for Services
(on page 40).

Test the DVR you have just provisioned to ensure that it functions according to
your customized behaviors. For details, see Verifying the Service Setup (on page
41).
Provisioning a DVR for Services
Follow these instructions to provision a DVR in your headend for all the services
you might test: DVR and stand-alone service.
1
Is your billing system able to add the packages for the services you are testing to
the DVR you are using for testing?
 If yes , ask your billing system to add appropriate packages to the DVR you
are using for testing. After the billing system adds the packages, go to
Verifying the Service Setup (on page 41).

If no , click the DNCS tab on the DNCS Administrative Console.
2 Click the Element Provisioning tab.
3 Click DHCT . The DHCT Provisioning window opens, similar to the following
example.