background image

14 

 

4028520 Rev A 

 

What Are the System Requirements for Internet Service? 

 

What Are the System Requirements for Internet Service? 

To ensure that your cable modem operates efficiently for high-speed Internet service, 
verify that all of the Internet devices on your system meet or exceed the following 
minimum hardware and software requirements. 

Note:

 You will also need an active cable input line and an Internet connection. 

Minimum System Requirements for a PC 

 

 

A PC with a Pentium MMX 133 processor or greater 

 

 

32 MB of RAM 

 

 

Web browsing software 

 

 

CD-ROM drive 

Minimum System Requirements for Macintosh 

 

 

MAC OS 7.5 or later 

 

 

32 MB of RAM 

System Requirements for an Ethernet Connection 

 

 

A PC with Microsoft Windows 95 operating system (or later) with TCP/IP 
protocol installed, or an Apple Macintosh computer with TCP/IP protocol 
installed 

 

 

An active 10/100BASE-T Ethernet network interface card (NIC) installed 

System Requirements for a USB Connection 

 

 

A PC with Microsoft Windows 98SE, ME, 2000, XP, or Vista operating system 

 

 

A master USB port installed in your PC 

 

Summary of Contents for DPQ2202







































Reviews: