26
78-4017656 Rev B
How Do I Connect the Cable Modem for Internet and Telephone Service?
6
Locate the AC power cord provided with your cable modem. Insert one end of
the power cord into the AC connector on the back of the cable modem. Then,
plug the AC power cord into an AC outlet to power-up the cable modem. The
cable modem will perform an automatic search to locate and sign on to the
broadband data network. This process may take up to 2-5 minutes. The modem
will be ready for use when the
POWER
,
DS
,
US
and
ONLINE
LEDs on the front
panel of the cable modem stop blinking and remain on continuously.
7
Plug in and power on your PC and other home network devices. The
LINK
LED
on the cable modem corresponding to the connected devices should be on or
blinking.
8
Once the cable modem is online, most Internet devices will have immediate
Internet access.
Note:
If your PC does not have Internet access, refer to
Frequently Asked
Questions
(on page 29) for information on how to configure your PC for TCP/IP.
For Internet devices other than PCs, refer to the DHCP or IP Address
configuration section of the User Guide or Operations Manual for those devices.
Summary of Contents for DPC3202
Page 39: ......
