Setting Up Your System with the Setup Wizard
4030765 Rev 01
21
5
Click
Next
. The (Setup Wizard 2/4 ------- Time Settings) screen opens. This
screen lets you synchronize the time on the residential gateway with an Internet
time server. If you do not syncrhonize the time with an Internet time server, the
residential gateway will use its default time.
6
Do you want to automatically synchronize the time on the residential gateway
with an Internet Time server?
If yes, select the Automatically synchronize with Internet time servers check
box. Go to step 7.
If no, clear the Automatically synchronize with Internet time servers check
box. The residential gateway will get its time from its own internal clock. Go
to step 9.
7
In the First NTP time server field, select the Network Time Protocol (NTP) time
server from the drop-down list that you want the residential gateway to check
first to get its time.
8
In the Second NTP time server field, select the time server from the drop-down
list that you want the to use as a backup server for the residential gateway to get
its time.
9
In the Time zone offset field, select your time zone from the drop-down list.
3-6-2009 Draft
Summary of Contents for DDR2201 Series
Page 2: ...3 6 2009 Draft ...
Page 32: ...3 6 2009 Draft ...
