© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
●
Support for Basic Interoperable Scrambling System (BISS) conditional access
●
Decryption and transcoding of a single program for digital transport output
●
Program transcoding to support down-conversion of a MPEG-4 HD program to a MPEG-2 SD program
●
PSI/SI regeneration
●
4:2:0 HD 1080i and 720p video decoding
●
Active Format Descriptor (AFD) support for down-conversion of an HD program with aspect ratio
conversion
●
Dolby Digital (AC-3) audio decoding
●
Closed captioning pass-through ofEIA-608 and EIA-708 for a transcoded program
●
Audio pass-through synchronization for a transcoded program
●
Additional ASI outputs for redundancy
●
MPEGoIP output for network connectivity
●
DVB subtitle pass-through with a transcoded program
●
Contact closure terminals for simple alarm monitoring
●
Dual-tone multifrequency (DTMF) cue tone and cue trigger outputs for advertisement insertion
●
Simple Network Management Protocol (SNMP) for setup, control, and monitoring
●
Field upgradeable software
●
Front panel liquid crystal display (LCD) for control and monitoring
●
Web browser interface for easy setup, control, and monitoring
●
Uplink addressable decoder output control, including vertical blanking interval (VBI) data, audio routing,
DPI, and ASI output)
●
Digital program mapping providing uplink control for service replacements in blackout areas
Product Specifications
Table 1 provides product specifications for the Cisco D9858-1 Advanced Receiver Transcoder.
Table 1.
Product Specifications
Feature
Description
System
Standards
MPEG-2/DVB compatible
EN 300 421, EN 300 468
Demodulation
DVB-S QPSK, DVB-S2QPSK, and 8 PSK
Tuner
Number of RF inputs
4 (1 active at a time)
Input level
25 to -65 dBm per carrier
Frequency range
950 to 2150 MHz
Symbol rate range
●
DVB-S:
◦
1 to 45 Msymbols per second
●
DVB-S2:
◦
10.0 to 30 Msymbols per second
◦
1.0 to 10 Msymbols per second “contact Cisco”
