In GET URIs only, the index argument must contain a value for the transcoder, all other arguments so not
contain values.
Note
curl -X GET -i -H "Accept: application/json" -H
"X-SESSION-ID: $token" -k "https://192.168.0.1/ws/v2/service_cfg/transcode/
subt?index=5&langmenu"
If successful, the following is an example of the return body:
{
"transcode": {
"subt": {
"index": "5",
"langmenu": "PMT Order"
}
}
}
Example 5: GET multiple SUBT transcoder values for a specific transcoder
The following example assumes that the user has successfully logged onto the unit, received the session id
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
change the IP to the specific unit IP in use. The following example retrieves multiple parameter values from
the HD transcoder settings for transcoder 5.
The user must always specify the port number in the URI followed by the URI arguments the user wishes
to retrieve. This example retrieves the langmenu, langentry, and foregndcol values from transcoder 5.
Note
In GET URIs only, the index argument must contain a value for the transcoder, all other arguments do
not contain values.
Note
curl -X GET -i
-H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/transcode/subt?index=5&langmenu&langentry&foregndcol"
If successful, the return body will be:
{
"transcode": {
"subt": {
"index": "5",
"foregndcol": "Auto",
"langentry": "eng",
"langmenu": "PMT Order"
}
}
}
User Configuration Command
Table 213: Command Details
Description
Command Detail
https://192.168.0.1/ws/v2/service_cfg/user
Command URL
Allows set or get of user configuration.
Command Information
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
256
API Definitions
User Configuration Command
