Cisco CSR 1000v Series Software Configuration Manual Download Page 265

Page: 265 / 314

Purpose

Command or Action

•

hostname

—

Scrubs all high-level commands plus the

hostname

command.

Scrubbing the hostname from configuration messages can cause
Smart Call Home processing failure on some platforms.

Note

Sending Call Home Communications Manually

You can manually send several types of Call Home communications. To send Call Home communications,
perform any necessary tasks in sections from

Sending a Call Home Test Message Manually, on page 253

Manually Sending Command Output Message for One Command or a Command List, on page 256

Sending a Call Home Test Message Manually

You can use the

call-home test

command to send a user-defined Call Home test message.

To manually send a Call Home test message, perform the following step:

SUMMARY STEPS

call-home test

[

“

test-message

”

]

profile name

DETAILED STEPS

Purpose

Command or Action

Sends a test message to the specified destination profile. The user-defined
test message text is optional but must be enclosed in quotes (

“”

) if it

call-home test

[

“

test-message

”

]

profile name

Example:

Router# call-home test profile profile1

Step 1

contains spaces. If no user-defined message is configured, a default
message is sent.

Sending Call Home Alert Group Messages Manually

You can use the

call-home send

command to manually send a specific alert group message.

Note the following guidelines when manually sending a Call Home alert group message:

•

Only the snapshot, crash, configuration, and inventory alert groups can be sent manually. Syslog alert
groups cannot be sent manually.

Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide

253

Configuring Call Home for the Cisco CSR 1000v

Sending Call Home Communications Manually

Summary of Contents for CSR 1000v Series



























































































































































































































































































































Search results

Summary of Contents for CSR 1000v Series

Reviews:

Related manuals for CSR 1000v Series

Brands by name

Popular brands

Cisco CSR 1000v Series, Software Configuration Manual

Search results

Summary of Contents for CSR 1000v Series

Reviews:

Related manuals for CSR 1000v Series

Brands by name

Popular brands