Cisco CPS-UCS-1RU-K9 User Manual Download Page 71 | Manualshive

Page: 71 / 84

background image

4-13

Cisco CSS UCS Platform Series User Guide, CPS-UCS-1RU-K9 / CPS-UCS-2RU-K9

Chapter 4 Replacing Hardware Components

Installing or Replacing Server Components

Related Information

For more information about hard drive replacement, see the “

Replacing Hard Drives or Solid State

Drives

” in the

Cisco UCS C240 Server Installation and Service Guide

. This document also includes

instructions to replace a drive backplane.

Replacing a PCIe Card

Refer to the following topics for more information:

•

Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA Card, page 4-13

•

Installing or Replacing a PCIe Card: Cisco Connected Safety and Security UCS C220, page 4-13

•

Installing or Replacing a PCIe Card: Cisco Connected Safety and Security UCS C240, page 4-15

Caution

Cisco supports all PCIe cards qualified and sold by Cisco. PCIe cards not qualified or sold by Cisco are
the responsibility of the customer. Although Cisco will always stand behind and support the C-Series
rack-mount servers, customers using standard, off-the-shelf, third-party cards must go to the third-party
card vendor for support if any issue with that particular third-party card occurs.

Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA Card

The Cisco Connected Safety and Security UCS C220 and Cisco Connected Safety and Security UCS
C240 servers support the (optional) Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA
(CPS-AEPCI05) card. This card is used to connect external components, such as external storage
devices.

See the following for more information:

•

LightPulse® LPe12000/LPe12002 Data Sheet

for product overview information:

http://www.cisco.com/en/US/prod/collateral/modules/ps10277/ps12571/elx_ds_all_hba_lpe12000.
pdf

•

Emulex LightPulse LPe12002 website

, including features, specifications, and other information:

http://www.emulex.com/products/fibre-channel-hbas/emulex-branded/lightpulse-lpe12002/feature
s.html

Installing or Replacing a PCIe Card: Cisco Connected Safety and Security UCS C220

For instructions to install or replace a PCIe card, see the following topics:

•

PCIe Slots: Cisco Connected Safety and Security UCS C220, page 4-14

•

Replacing a PCIe Card: Cisco Connected Safety and Security UCS C220, page 4-14

•

Related Documentation, page 4-15

«
...
69
70
71
72
73
...
»

Summary of Contents for CPS-UCS-1RU-K9





















































































Reviews:

No comments

Related manuals for CPS-UCS-1RU-K9

Univerge SV8100

Brand: NEC Pages: 2

Brand: Omega Pages: 49

Brand: Iwatsu Pages: 338

Brand: Sun Microsystems Pages: 148

Brand: Omega Pages: 16

Brand: ioCorp Pages: 18

Brand: Thecus Pages: 120

AssuredSAN 4004 Series

Brand: Dot Hill Pages: 59

UniServer R4300 G6

Brand: H3C Pages: 542

Brand: Inspur Pages: 2

Brand: LG Pages: 100

Brand: LG Pages: 35

6180DN - Phaser Color Laser Printer

Brand: Xerox Pages: 2

SafeNet ProtectServer PCIe HSM 5.4

Brand: Thales Pages: 27

Brand: Habey Pages: 4

Brand: Tibbo Pages: 12

DIGIARRAY DA-4000E

Brand: Digiever Pages: 9

ZXCLOUD iBox CT220

Brand: Zte Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands