3-17
Cisco Content Delivery Engine Hardware Installation Guide
OL-13478-01
Chapter 3 Installing the Software and Initially Configuring a CDE
Verifying the CDSM
Figure 3-22
Devices Page
Step 4
Verify that the devices you configured for your CDS network are listed.
Step 5
If a device is not listed, restart the CMS for that device by using either the console or Telnet connection
and entering the following commands from the global configuration mode:
CDE(config)#
no cms enable
CDE(config)#
cms enable
The installation is now complete. Refer to the
Cisco Internet Streamer CDS 2.0 Software Configuration
Guide
for information on configuring and using the CDS. See the
