4-3
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03
Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE
Running the BIOS Setup Utility
Running the BIOS Setup Utility for the CDE100
Perform the following steps to run the BIOS setup utility for the CDE100:
Step 1
Power on the CDE100.
Step 2
Insert the CD with the CDS image into the internal CD-ROM drive.
Step 3
Reboot the CDE100 and wait for the initial BIOS screen to appear.
Note
Step 4
through
Step 16
are required only for the initial installation. The BIOS setup does not need to be
changed for the second and subsequent installations or recovery.
Step 4
To enter the BIOS Setup menu, press Delete as instructed at the bottom of the BIOS screen. The Main
menu appears (see
Figure 4-1
).
Figure 4-1
Main Menu
Tip
If you are viewing the initial BIOS screen through a remote terminal server, Ctrl-Backspace functions
the same as the Delete key.
Step 5
From the Main menu, choose Boot and press Enter. The Boot Settings menu appears (see
Figure 4-2
).
