S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
3-20
Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference
OL-6988-02
Chapter 3 Initial Configuration
Working with Configuration Files
Saving the Configuration
After you have created a running configuration in system memory, you can save it to the startup
configuration in the bootflash: file system using the following copy command:
switch# copy running-config bootflash:startup-config
The copy running-config startup-config command is an alias to the previous command and is used
frequently throughout this guide.
Copying Files
The syntax for the copy command follows and is explained in
Table 3-1
.
switch# copy <scheme>://<
server>/<file name> <scheme>://<server>/<file name>
•
This example shows how to copy a running configuration to the bootflash: file system:
switch# copy running-config bootflash:my-config
•
This example shows how to overwrite the contents of an existing configuration in the nonvolatile file
system:
switch# copy bootflash:my-config bootflash:startup-config
Backing Up the Current Configuration
Before installing or migrating to any software configuration, back up the startup configuration.
•
This example shows how to back up the startup configuration copy in the bootflash: file system
(ASCII file):
switch# copy startup-config bootflash:my-config
•
This example shows how to back up the startup configuration to the TFTP server (ASCII file):
switch# copy startup-config tftp://172.16.10.100/my-config
•
This example shows how to back up the running configuration to the bootflash: file system (ASCII
file):
switch# copy running-config bootflash:my-config
Table 3-1
copy Command Syntax
Scheme
Server
File Name
volatile
—
User-specified
bootflash
—
User-specified
tftp
IP address or DNS name
User-specified
ftp