Cisco Cisco Access Registrar 4.2 Administrator'S Manual Download Page 12

Page: 12 / 151

D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60

Administrator Guide

Codec C60 at a glance

The Codec C60 is the 1080p HD video collaboration engine.

Based upon the same technology as the Codec C90, the C60

delivers Full HD video, HD collaboration and superior audio for

natural communication at its finest, delivering unrivaled value.

The C60 is a standards-compliant codec for integration into

team meeting rooms, boardrooms and industry projects.

• Full High Definition Video with up to 4 HD sources, and

collaboration with optimal definition for the best video

quality every time, regardless of environment.

• Highest Quality Audio with flexibility to add up to 4

microphones directly from the codec, and superior, full

duplex audio with high quality stereo sound.

• Full APIs.
• Ensure successful, streamlined integration projects with

standards-compliant professional connectors.

Integrator package

The integrator package of the Codec C60 comes with the

PrecisionHD 1080p camera, microphone and cables.

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

Summary of Contents for Cisco Access Registrar 4.2
























































































































































Search results

Summary of Contents for Cisco Access Registrar 4.2

Reviews:

Related manuals for Cisco Access Registrar 4.2

Brands by name

Popular brands

Cisco Cisco Access Registrar 4.2, Administrator'S Manual

Search results

Summary of Contents for Cisco Access Registrar 4.2

Reviews:

Related manuals for Cisco Access Registrar 4.2

Brands by name

Popular brands