Cisco Catalyst 9300 Series, Hardware Installation Manual, Page: 26 / 132

Description Color
The StackPower budget is not sufficient to meet current power demands. Blinking amber
Port LEDs and Modes
Each Ethernet port, 1-Gigabit Ethernet module slot, and 10-Gigabit Ethernet module slot has a port LED.
These port LEDs, as a group or individually, display information about the switch and about the individual
ports. The port mode determines the type of information shown by the port LEDs.
To select or change a mode, press the Mode button until the desired mode is highlighted. When you change
port modes, the meanings of the port LED colors also change.
When you press the Mode button on any switch in the switch stack, all the stack switches change to show the
same selected mode. For example, if you press the Mode button on the active switch to show the SPEED
LED, all the other switches in the stack also show the SPEED LED.
Table 10: Port Mode LEDs
Description Port Mode Mode LED
The port status. This is the default mode. Port status STAT
The port operating speed: 10, 100, or 1000 Mb/s. Port speed SPEED
The port duplex mode: full duplex or half duplex. Port duplex mode DUPLX
The active switch status. Active ACTV
Stack member status.
The StackWise port status. See STACK LED, on page 11 .
Stack member status
StackWise port status
STACK
The PoE+ port status. The PoE+ port status. PoE
2
2
Only switches with PoE+ ports.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
14
Product Overview
Port LEDs and Modes