1-10
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-01
Chapter 1 Product Overview
Switch Features
Table 1-3
describes the features of the Catalyst 4507R-E switch.
Table 1-3
Features of the Catalyst 4507R-E Switch
Feature
Description
Ethernet speeds
•
Ethernet (10BASE-T) interface to workstations and repeaters
•
Fast Ethernet (100BASE-T) interface to workstations, servers, switches, and
routers
Note
Autonegotiation of link speed on each 10/100 port allows migration to
100BASE-T from a 10BASE-T installed base.
•
Gigabit Ethernet (1000BASE-T and 1000BASE-X) interfaces for backbone
interconnection of high-performance switches and routers
•
10-Gigabit Ethernet interfaces for backbone interconnection of
high-performance switches and routers
Standard equipment
•
Seven-slot modular chassis with one slot reserved for a supervisor engine,
one slot reserved for a redundant supervisor engine, and five slots for
switching modules
•
Two power supply bays
•
One hot-swappable fan assembly
Power supplies
•
Can support a 1000 W, 1300 W, 1400 W, 2800 W, or 4200W AC-input power
supply or a 1400 W DC-input single or triple-input power supply
1
•
Optional redundant power supply
Supervisor engine
support
•
Supports the WS-X4013+, WS-X4515, WS-X4516, WS-X4516-10GE, and
WS-X45-Sup6-E Supervisor Engines
•
Holds the ASIC-based forwarding engine (data path) and the management
processor and software (control path)
•
Features interface monitoring, environmental status, and SNMP and
console/Telnet interface
Note
With a single supervisor, packets are not forwarded while the module is
removed; a system reboot occurs when a supervisor engine is reinserted.
In redundant systems, removing the active supervisor causes the standby
supervisor to become active.
