Cisco Catalyst 4500 Series, Software Configuration Manual

Page: 1810 / 2086

72-2
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 72 Configuring SNMP
About SNMP
•
SNMP Community Strings, page 72-4
• Using SNMP to Access MIB Variables, page 72-4
•
SNMP Notifications, page 72-5
SNMP Versions
The Catalyst 4500 series switch supports these SNMP versions:
•
SNMPv1—The Simple Network Management Protocol, a Full Internet Standard, defined in
RFC 1157.
• SNMPv2C replaces the Party-based Administrative and Security Framework of SNMPv2Classic
with the community-string-based Administrative Framework of SNMPv2C while retaining the bulk
retrieval and improved error handling of SNMPv2Classic. It has these features:
–
SNMPv2—Version 2 of the Simple Network Management Protocol, a Draft Internet Standard,
defined in RFCs 1902 through 1907.
– SNMPv2C—The community-string-based Administrative Framework for SNMPv2, an
Experimental Internet Protocol defined in RFC 1901.
•
SNMPv3—Version 3 of the SNMP is an interoperable standards-based protocol defined in RFCs
2273 to 2275. SNMPv3 provides secure access to devices by authenticating and encrypting packets
over the network and includes these security features:
– Message integrity—Ensures that a packet was not tampered with in transit
–
Authentication—Determines that the message is from a valid source
– Encryption—Mixes the contents of a package to prevent it from being read by an unauthorized
source
Note To select encryption, enter the priv keyword. This keyword is available only when the
crypto (encrypted) software image is installed.
Both SNMPv1 and SNMPv2C use a community-based form of security. The community of managers
able to access the agent’s MIB is defined by an IP address access control list and password.
SNMPv2C includes a bulk retrieval mechanism and more detailed error message reporting to
management stations. The bulk retrieval mechanism retrieves tables and large quantities of information,
minimizing the number of round-trips required. The SNMPv2C improved error-handling includes
expanded error codes that distinguish different kinds of error conditions; these conditions are reported
through a single error code in SNMPv1. Error return codes in SNMPv2C report the error type.
SNMPv3 provides for both security models and security levels. A security model is an authentication
strategy set up for a user and the group within which you reside. A security level is the permitted level
of security within a security model. A combination of the security level and the security model determine
which security mechanism is used when handling an SNMP packet. Available security models are
SNMPv1, SNMPv2C, and SNMPv3.