Cisco Catalyst 3650 Series, Command Reference Manual

Page: 458 / 1108

flow record
To create a Flexible NetFlow flow record, or to modify an existing Flexible NetFlow flow record, and enter
Flexible NetFlow flow record configuration mode, use the
flow record command in global configuration
mode. To remove a Flexible NetFlow record, use the no form of this command.
flow record record-name
no flow record record-name
Syntax Description
Name of the flow record that is being created or modified. record-name
Command Default
A Flexible NetFlow flow record is not configured.
Command Modes
Global configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Usage Guidelines
A flow record defines the keys that Flexible NetFlow uses to identify packets in the flow, as well as other
fields of interest that Flexible NetFlow gathers for the flow. You can define a flow record with any combination
of keys and fields of interest. The supports a rich set of keys. A flow record also defines the types of counters
gathered per flow. You can configure 64-bit packet or byte counters.
Examples The following example creates a flow record named FLOW-RECORD-1, and enters Flexible NetFlow flow
record configuration mode:
Device(config)#
flow record FLOW-RECORD-1
Device(config-flow-record)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
432
flow record