Cisco Catalyst 3650 Series, Command Reference Manual

Page: 276 / 1108

service-policy
To apply a filter on incoming or outgoing service discovery information on a service list, use the service-policy
command. To remove the filter, use the no form of the command.
service-policy service-policy-name { IN | OUT }
no service-policy service-policy-name { IN | OUT }
Syntax Description
Applies a filter on incoming service discovery information. service-policy-name IN
Applies a filter on outgoing service discovery information. service-policy-name OUT
Command Default
Disabled.
Command Modes
mDNS configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Examples This example applies a filter on incoming service discovery information on a service list:
Device(config-mdns)# service-policy serv-pol1 IN
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
250
service-policy