31-89
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Chapter 31 Configuring IP Unicast Routing
Monitoring and Maintaining the IP Network
Monitoring and Maintaining the IP Network
You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
to clear routes or display status:
Table 31-17 Commands to Clear IP Routes or Display Route Status
Command
Purpose
clear ip route {network [mask | *]}
Clear one or more routes from the IP routing table.
show ip protocols
Display the parameters and state of the active routing protocol
process.
show ip route [address [mask] [longer-prefixes]] |
[protocol [process-id]]
Display the current state of the routing table.
show ip route summary
Display the current state of the routing table in summary form.
show ip route supernets-only
Display supernets.
show ip cache
Display the routing table used to switch IP traffic.
show route-map [map-name]
Display all route maps configured or only the one specified.