38-108
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 38 Configuring IP Unicast Routing
Monitoring and Maintaining the IP Network
Monitoring and Maintaining the IP Network
You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
to clear routes or display status:
Table 38-17
Commands to Clear IP Routes or Display Route Status
Command
Purpose
clear ip route
{
network
[
mask
| *
]}
Clear one or more routes from the IP routing table.
show ip protocols
Display the parameters and state of the active routing protocol
process.
show ip route
[
address
[
mask
] [
longer-prefixes
]] |
[
protocol
[
process-id
]]
Display the state of the routing table.
show ip route summary
Display the state of the routing table in summary form.
show ip route supernets-only
Display supernets.
show ip cache
Display the routing table used to switch IP traffic.
show route-map
[
map-name
]
Display all configured route maps or only the one specified.
