Cisco Catalyst 2960 Series, Configuration Manual

Page: 857 / 2288

C H A P T E R
35
Configuring
is a security application that provides centralized validation of users attempting to gain access
to a router or network access server. provides detailed accounting information and flexible
administrative control over authentication and authorization processes. is facilitated through
authentication, authorization and accounting (AAA) and can be enabled only through AAA commands.
• Finding Feature Information, page 775
• Prerequisites for , page 775
• Restrictions for , page 776
• Information About , page 777
• How to Configure , page 883
• Configuration Examples for , page 895
• Additional References for , page 899
• Feature Information for , page 900
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to
http://www.cisco.com/go/cfn . An account on Cisco.com is not
required.
Prerequisites for
The following are the prerequisites for set up and configuration of switch access with (must be
performed in the order presented):
1 Configure the switches with the server addresses.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
775