Cisco Catalyst 2960 Series, Configuration Manual

Page: 799 / 2288

C H A P T E R
31
Managing Switch Stacks
• Finding Feature Information, page 717
• Prerequisites for Switch Stacks, page 717
• Restrictions for Switch Stacks, page 718
• Information About Switch Stacks, page 718
• How to Configure a Switch Stack, page 733
• Troubleshooting the Switch Stack, page 741
• Monitoring the Switch Stack, page 743
• Configuration Examples for Switch Stacks, page 744
• Additional References for Switch Stacks, page 747
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to
http://www.cisco.com/go/cfn . An account on Cisco.com is not
required.
Prerequisites for Switch Stacks
All stack members must run the same Cisco IOS software image to ensure compatibility among stack members.
For switch stack hardware considerations, see the Catalyst 2960-X Switch Hardware Installation Guide .
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
717