Cisco Catalyst 2960 Series, Configuration Manual

Page: 613 / 2288

Configuring a Bridged NetFlow on a VLAN
You can apply a flow monitor and an optional sampler to a VLAN.
SUMMARY STEPS
1.
configure terminal
2.
vlan
[
configuration
] vlan-id
3. interface { vlan } vlan-id
4.
ip flow monitor monitor name [ sampler sampler name ] { input | output }
5. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enters the global configuration mode.
configure terminal
Example:
Switch# configure terminal
Step 1
Enters VLAN or VLAN configuration mode. vlan [ configuration ] vlan-id Step 2
Example:
Switch(config)# vlan configuration 30
Switch(config-vlan-config)#
Specifies the SVI for the configuration. interface { vlan } vlan-id Step 3
Example:
Switch(config)# interface vlan 30
Associates a flow monitor and an optional sampler
to the VLAN for input or output packets. ip flow monitor monitor name [ sampler sampler name ] { input
| output }
Step 4
Example:
Switch(config-vlan-config)# ip flow monitor
MonitorTest input
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Switch# copy running-config
Step 5
startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
531
How to Configure NetFlow Lite