Cisco Catalyst 2960 Series, Configuration Manual

Page: 2112 / 2288

Related Topics
Configuration Guidelines, on page 2030
Configuration Guidelines
For information on the IP SLA commands, see the Cisco IOS IP SLAs Command Reference, Release 12.4T
command reference.
For detailed descriptions and configuration procedures, see the Cisco IOS IP SLAs Configuration Guide,
Release 12.4TL .
Related Topics
Default Configuration, on page 2029
Configuring the IP SLA Responder
The IP SLA responder is available only on Cisco IOS software-based devices, including some Layer 2 switches
that do not support full IP SLA functionality.
Follow these steps to configure the IP SLA responder on the target device (the operational target):
SUMMARY STEPS
1. enable
2.
configure terminal
3.
ip sla responder
{
tcp-connect
|
udp-echo
}
ipaddress ip-address port port-number
4. end
5.
show running-config
6. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable Step 1
Example:
Switch> enable
Enters the global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 2
Configures the switch as an IP SLA responder. ip sla responder { tcp-connect | udp-echo }
ipaddress ip-address port port-number
Step 3
The keywords have these meanings:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2030
How to Configure IP SLAs Operations