Cisco Catalyst 2960 Series, Configuration Manual

Page: 2095 / 2288

(Mandatory)
• nop--Retrieves the current counter value.
• set--Sets the counter value to the given value.
• inc--Increments the counter value by the given
value.
• dec--Decrements the counter value by the given
value.
op
Result String
val_remain %d
Where val_remain is the current value of the counter.
Set _cerrno
Yes
(_cerr_sub_err = 2) FH_ESYSERR (generic/unknown error from OS/system)
This error means that the operating system reported an error. The POSIX errno value that is reported with the
error should be used to determine the cause of the operating system error.
(_cerr_sub_err = 11) FH_ENOSUCHESID (unknown event specification ID)
This error means that the event specification ID could not be matched when the event was being registered
or that an event detector internal event structure is corrupt.
(_cerr_sub_err = 22) FH_ENULLPTR (event detector internal error - ptr is null)
This error means that an internal EEM event detector pointer was null when it should have contained a value.
(_cerr_sub_err = 30) FH_ECTBADOPER (bad counter threshold operator)
This error means that the counter event detector set or modify operator was invalid.
description
Provides a brief description of the registered policy.
Syntax
description ?
Arguments
(Optional) Brief description of the policy consisting
of 1 to 240 characters. line
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2013
description