Cisco Catalyst 2960 Series, Configuration Manual

Page: 2087 / 2288

Result String
oid {%s} value {%s}
SNMP OID. oid
Value string of the associated SNMP data element. value
Set _cerrno
Yes
(_cerr_sub_err = 2) FH_ESYSERR (generic/unknown error from OS/system)
This error means that the operating system reported an error. The POSIX errno value that is reported with the
error should be used to determine the cause of the operating system error.
(_cerr_sub_err = 22) FH_ENULLPTR (event detector internal error - ptr is null)
This error means that an internal EEM event detector pointer was null when it should have contained a value.
(_cerr_sub_err = 37) FH_ENOSNMPDATA (can't retrieve data from SNMP)
This error means that there was no data for the SNMP object type.
(_cerr_sub_err = 51) FH_ESTATSTYP (invalid statistics data type)
This error means that the SNMP statistics data type was invalid.
(_cerr_sub_err = 54) FH_EFDUNAVAIL (connection to event detector unavailable)
This error means that the event detector was unavailable.
sys_reqinfo_syslog_freq
Queries the frequency information of all syslog events.
Syntax
sys_reqinfo_syslog_freq
Arguments
None
Result String
rec_list {{event frequency string 0}, {log freq str 1}, ...}
Where each event frequency string is:
time_sec %ld time_msec %ld match_count %u raise_count %u occurs %u
period_sec %ld period_msec %ld pattern {%s}
Seconds and milliseconds in POSIX timer units since
January 1, 1970, which represent the time the last
event was raised. time_sec time_msec
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2005
sys_reqinfo_syslog_freq