Cisco Catalyst 2960 Series, Configuration Manual

Page: 1664 / 2288

Purpose Command or Action
Returns to privileged EXEC mode. end
Example:
Switch(config)#
end
Step 3
Verifies your entries. show boot Step 4
Example:
Switch# show boot
The boot manual global command changes the setting of the
MANUAL_BOOT environment variable.
The next time you reboot the system, the switch is in boot loader mode,
shown by the
switch: prompt. To boot up the system, use the boot
filesystem:/file-url boot loader command.
• filesystem : — Uses flash: for the system board flash device.
switch: boot flash:
• For file-url — Specifies the path (directory) and the name of the
bootable image.
Filenames and directory names are case-sensitive.
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config
Step 5
startup-config
Configuring a Scheduled Software Image Reload
This task describes how to configure your switch to reload the software image at a later time.
SUMMARY STEPS
1. configure terminal
2.
copy running-config startup-config
3.
reload in
[ hh :] mm [ text ]
4. reload at hh : mm [ month day | day month ] [ text ]
5.
reload cancel
6. show reload
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1582
How to Perform Switch Setup Configuration