manualshive.com logo in svg

Cisco Catalyst 2928, Software Configuration Manual

The Cisco Catalyst 2928 is a highly reliable network switch designed to deliver unparalleled performance. With advanced features and seamless connectivity, it empowers organizations with efficient network operations. To maximize its potential, users can easily download the comprehensive Software Configuration Manual for free from our website, manualshive.com.

Share
Download
background image

 

33-20

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Chapter 33      Troubleshooting

Using the show platform forward Command

The 

no debug all

 privileged EXEC command disables all diagnostic output. Using the 

no debug all 

command is a convenient way to ensure that you have not accidentally left any 

debug

 commands 

enabled.

Redirecting Debug and Error Message Output

By default, the network server sends the output from 

debug

 commands and system error messages to the 

console. If you use this default, you can use a virtual terminal connection to monitor debug output 
instead of connecting to the console port. 

Possible destinations include the console, virtual terminals, internal buffer, and UNIX hosts running a 
syslog server. The syslog format is compatible with 4.3 Berkeley Standard Distribution (BSD) UNIX 
and its derivatives.

Note

Be aware that the debugging destination you use affects system overhead. Logging messages to the 
console produces very high overhead, whereas logging messages to a virtual terminal produces less 
overhead. Logging messages to a syslog server produces even less, and logging to an internal buffer 
produces the least overhead of any method.

For more information about system message logging, see 

Chapter 28, “Configuring System Message 

Logging.”

Using the show platform forward Command

The output from the 

show platform forward

 privileged EXEC command provides some useful 

information about the forwarding results if a packet entering an interface is sent through the system. 
Depending upon the parameters entered about the packet, the output provides lookup table results and 
port maps used to calculate forwarding destinations, bitmaps, and egress information. 

Note

For more syntax and usage information for the 

show platform forward 

command, see the switch 

command reference for this release.

Most of the information in the output from the command is useful mainly for technical support 
personnel, who have access to detailed information about the switch application-specific integrated 
circuits (ASICs). However, packet forwarding information can also be helpful in troubleshooting.

This is an example of the output from the 

show platform forward

 command on port 1 in VLAN 5 when 

the packet entering that port is addressed to unknown MAC addresses. The packet should be flooded to 
all other ports in VLAN 5.

Switch# 

show platform forward gigabitethernet0/1 vlan 5 1.1.1 2.2.2 ip 13.1.1.1 13.2.2.2 

udp 10 20     

Global Port Number:24, Asic Number:5

Src Real Vlan Id:5, Mapped Vlan Id:5

Ingress:

 Lookup                   Key-Used                    Index-Hit  A-Data

InptACL  40_0D020202_0D010101-00_40000014_000A0000     01FFA   03000000

L2Local  80_00050002_00020002-00_00000000_00000000     00C71   0000002B

Station Descriptor:02340000, DestIndex:0239, RewriteIndex:F005

==========================================

Summary of Contents for Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2928

LAWO edge User Manual preview
edge
Brand: LAWO Pages: 154
D-Link DSR-500 User Manual preview
DSR-500
Brand: D-Link Pages: 213
TP-Link VIGI NVR1008 Quick Installation Manual preview
VIGI NVR1008
Brand: TP-Link Pages: 2
Keithley 7011-C Instruction Manual preview
7011-C
Brand: Keithley Pages: 98
Eicon Networks Diva 2440 Quick Start Manual preview
Diva 2440
Brand: Eicon Networks Pages: 32
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Brand: ANTAIRA Pages: 19
Alarm NX-208E Installation Manual preview
NX-208E
Brand: Alarm Pages: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Brand: Genexis Pages: 9
Abocom 802.11a/b/g SDIO WiFi Module SDM3100 User Manual preview
802.11a/b/g SDIO WiFi Module SDM3100
Brand: Abocom Pages: 14
ZyXEL Communications P-2602H Series Specifications preview
P-2602H Series
Brand: ZyXEL Communications Pages: 2
Hanwha Techwin Wisenet PRN-6400DB4 User Manual preview
Wisenet PRN-6400DB4
Brand: Hanwha Techwin Pages: 125
Firetide HotPort 3103 User Manual preview
HotPort 3103
Brand: Firetide Pages: 32
Tachosys digiDL-B Administration Manual preview
digiDL-B
Brand: Tachosys Pages: 15
Aetina Nvidia Jetson Series Quick Start Manual preview
Nvidia Jetson Series
Brand: Aetina Pages: 7
Aetina AIE-KX13 User Manual preview
AIE-KX13
Brand: Aetina Pages: 22
Cambium Networks PTP 670 Series Installation Manual preview
PTP 670 Series
Brand: Cambium Networks Pages: 24
Cambium Networks PTP 300 Series Installation Manual preview
PTP 300 Series
Brand: Cambium Networks Pages: 32
Billion BiPAC 7402 Specifications preview
BiPAC 7402
Brand: Billion Pages: 2

Brands by name

Popular brands

Load more brands