xxvii
Catalyst 2928 Switch Software Configuration Guide
OL-23389-01
Preface
Audience
This guide is for the networking professional managing the Catalyst 2928 switch, hereafter referred to
as the
switch
. Before using this guide, you should have experience working with the Cisco IOS software
and be familiar with the concepts and terminology of Ethernet and local area networking.
Purpose
This guide provides the information that you need to configure Cisco IOS software features on your
switch. The Catalyst 2928 software provides enterprise-class intelligent services.
This guide provides procedures for using the commands that have been created or changed for use with
the Catalyst 2928 switch. It does not provide detailed information about these commands. For detailed
information about these commands, see the
Catalyst 2928 Switch Command Reference
for this release.
For information about the standard Cisco IOS Release 12.2 commands, see the Cisco IOS documentation
set available from the Cisco.com home page at
Technical Support & Documentation > Cisco IOS
Software
.
This guide does not provide detailed information on the graphical user interfaces (GUIs) for the
embedded device manager that you can use to manage the switch. However, the concepts in this guide
are applicable to the GUI user. For information about the device manager, see the switch online help.
This guide does not describe system messages you might encounter or how to install your switch. For
more information, see the
Catalyst 2928 Switch System Message Guide
for this release and the
Catalyst
2928 Switch Hardware Installation Guide
.
For documentation updates, see the release notes for this release.
Conventions
This publication uses these conventions to convey instructions and information:
Command descriptions use these conventions:
•
Commands and keywords are in
boldface
text.
•
Arguments for which you supply values are in
italic
.
•
Square brackets ([ ]) mean optional elements.
