2 Catalyst 1800 Token Ring Switch Cable Kit Guide
Connecting to a VT-Series Terminal
•
DB-25 VT-series connector
•
DB-25 modem connector
The Catalyst 1800 console cable kit (part number 78-1188-01) includes
•
One 6-foot (1.8-meter) length of unshielded twisted pair (UTP) EIA/TIA-232 cable with RJ-45
connectors at each end
•
One RJ-45 to DB-9 female adapter (for console port connection)
•
One RJ-45 to DB-9 female adapter (for PC connection)
•
One RJ-45 to DB-25 female adapter (for VT terminal connection)
•
One RJ-45 to DB-25 male adapter (for modem connection)
Connecting to a VT-Series Terminal
Follow these steps to connect a VT 320/420-series terminal to a Catalyst 1800 Token Ring switch
(see Figure 1):
Step 1
Plug either end of the EIA/TIA-232 cable into the RJ-45-to-DB-9 female adapter labelled
“Console port.”
Step 2
Connect the console port female adapter to the male DB-9 console port on the front of the
Catalyst 1800 chassis.
Step 3
Plug the RJ-45 connector at the other end of the EIA/TIA-232 cable into the
RJ-45-to-DB-25 female adapter labelled “VT series.”
Step 4
Connect the VT-series DB-25 female adapter to the DB-25 male adapter on the cable
extending from the VT terminal’s COMM port.
Step 5
Turn on the terminal and access the setup directory. Set the following parameters on your
terminal:
After these parameters are set, you can access out-of-band management. Refer to the Catalyst 1800
Token Ring Switch User Guide for instructions on using the console interface.
Transmit
9600
Bits per character (BPC)
8
Parity
None
Stop bit
1
Flow control
Off
