Cisco C9117AXI-ME-x, Getting Started Manual

Page: 17 / 36

17
Cisco Catalyst 9117AX Series Access Points
12
Checking the Access Point LEDs
The location of the access point status LED is shown in Figure 1 .
Note Regarding LED status colors, it is expected that there will be small variations in color intensity and hue from
unit to unit. This is within the normal range of the LED manufacturer’s specifications and is not a defect.
However, the intensity of the LED can be changed through the controller.
The access point status LED indicates various conditions and are described in Table 2 .
Table 2 LED Status Indications
Message Type LED State Message Meaning
Association status Green Normal operating condition, but no
wireless client associated
Blue Normal operating condition, at least one
wireless client association
Boot loader status Green Executing boot loader
Boot loader error Blinking Green Boot loader signing verification failure
Operating status Blinking Blue Software upgrade in progress
Alternating between Green and
Red Discovery/join process in progress
Access point operating
system errors Cycling through
Red-Off-Green-Off-Blue-Off General warning; insufficient inline power