background image

2-13

Cisco IR800 Integrated Services Router Software Configuration Guide

Chapter 2      Product Overview

  Software Overview

Note

If that particular IOS image is not present, the device will drop in rommon-2 mode and you will 
need to manually boot an IOS image from there.

Step 2

Copy your desired default config file to the startup-config.

Step 3

Reload the router. Do NOT enter Yes if prompted whether you want to save the running-config to 
startup-config.

Note

To simplify the boot process, the IR800 routers do not support the ROMMON configuration register and 
the associated CLI commands. The IR800 either boots the pre-configured images, or stops at the 
ROMMON prompt for user intervention. In the event of a boot failure, see 

Chapter 3, “IR800 Bootstrap 

Sequence and Troubleshooting”

 for additional information.

An example of the log activity after a reboot follows:

IR800# 

show log

 

*Nov 30 19:31:04.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, 

changed state to down

*Nov 30 19:31:10.651: %PLATFORM-5-RESET_BUTTON: Reset Button pressed during boot up.

*Nov 30 19:31:11.527: %LINK-3-UPDOWN: Interface Async0, changed state to up

*Nov 30 19:31:11.595: %SYS-5-RESTART: System restarted --

Cisco IOS Software, ir800 Software (ir800-UNIVERSALK9-M), Version 15.6(1)T, RELEASE 

SOFTWARE (fc1)

Software Overview

The IR800 series offers a rich IOS feature set. This section provides a brief overview of these features.

Note

Features may be dependent of platform and releases

Feature

Description

Cellular Connectivity

4G LTE, 3.7G, 3.5G, or 3G Cellular WAN link

External, dual 4G antennas with main and receive diversity for maximum signal 
strength connectivity

Dual subscriber identity module (SIM) capability

Wi-Fi (829 only)

Dual radio 802.11n concurrent 2.4 GHz and 5.0 GHz with embedded 2X3 MIMO

Up to 300 Mbps data rate per radio

Cisco IOx Application Support

Provides an open, extensible environment for hosting OS and applications at the 
network edge; expansion module slot to enable additional future communication 
technologies.

Summary of Contents for C819HG
















Reviews: