Cisco BWX360 WiMAX, User Manual

Page: 18 / 74

18
User interface
Cisco BWX360 WiMAX Outdoor Modem / engbt / Product number / Basic_configuration.fm / 7.4.10
Sc
hablone 200
7
_10_19
Opening online Help
There is an online Help for each screen of the configuration program, which you can
open directly on the screen.
³
Click on the question mark button at the top right.
The online Help is shown in the right pane of the configuration program.
³
If necessary, click on Open Help window to open the online Help in a separate
window.
Menu structure
The menu of the user interface on your Cisco BWX360 WiMAX Outdoor Modem is split
into the following main areas:
Home , Basic Setup Wizard , Advanced Settings and
Status . Under these menu options, you will find the following areas:
Menu Description
Home Brief description of all the menus in your Cisco BWX360 WiMAX
Outdoor Modem, as well as the connection status and the lan-
guage change feature; see "User interface" on page 15.
Basic Setup Wizard Establish a connection to the WiMAX network, optimise the
antenna direction and set up your Internet connection, see "Basic
Setup Wizard" on page 20.
Advanced Settings
Configure your Internet access and your local network and per-
form administration tasks. For example, you can enter a system
password for access to your Cisco BWX360 WiMAX Outdoor
Modem or change it, see "Configuration with the Web browser" on
page 15.
Status Obtain information about the operating status of your
Cisco BWX360 WiMAX Outdoor Modem and read off the device
and version numbers as well as IP addresses; see "Status" on
page 35.
Internet See "Internet" on page 36.
Local Network See "Local network LAN" on page 37.
Device Status See "Device status" on page 38.
Radio Status See "Radio status" on page 38.
Setting the language
The user interface is initially displayed in the language that has been set by your oper-
ator. Other languages may be available.
³
If you wish to change the preset language, click on the Language button at the top
right. This opens the page for setting the language.
³
Click on the arrow next to the selection field to open it and select your language.
³
Click on Ok to change the language.