38
Device status
Cisco BWX360 WiMAX Outdoor Modem / engbt / Product number / Status.fm / 7.4.10
Sc
hablone 200
7
_10_19
Device status
Status
>
Device Status
The device status of your Cisco BWX360 WiMAX Outdoor Modem is displayed in the
Device Status
submenu.
³
If necessary, click the
Refresh
button to refresh the data in the status display.
Radio status
Status
>
Radio Status
Information about the radio connection to the WiMAX network is displayed in the
Radio
Status
submenu.
System uptime
Operating time of your Cisco BWX360 WiMAX Outdoor
Modem since it was last restarted. The operating time is given
in the format ddd:hh:mm:ss (d=days, h=hours, m=minutes,
s=seconds).
System time
Displays the current date and time. This information is trans-
mitted to your Cisco BWX360 WiMAX Outdoor Modem by the
WiMAX network.
Operating Mode
Role played by your Cisco BWX360 WiMAX Outdoor Modem
during connection setup to the Internet (
Router
or
Bridge
).
Device temperature
Current device temperature
inside
your Cisco BWX360
WiMAX Outdoor Modem. In the event of overheating, the
Cisco BWX360 WiMAX Outdoor Modem switches off.
System Log
Error protocol in which you will find information about prob-
lems.
Connected to a base station
Indicates whether or not your Cisco BWX360 WiMAX Outdoor Modem is con-
nected to a base station.
Base station ID
ID number of the base station to which the device is connected.
MAC state
Status of the connection setup to the base station. The information shown here is
only intended for technically experienced users. Under
Connected to a base sta-
tion
is shown whether a connection to a base station exists.
Authentication
Indicates whether an authentication method is used for the WiMAX connection.
Protocol
Protocol used for authentication.
Summary of Contents for BWX360 WiMAX
Page 2: ......
