background image

BXM T3/E3 Broadband Switch Module

Cell Buffering

• Large ingress and egress cell buffer architecture

• 204,800 to 1,024,000 cells stored per card

– Accommodate large traffic bursts

– Avoid network congestion and cell discard

– Suited to TCP/IP traffic

Intelligent QoS (Quality of Service) Management Suite

Connection Admission Control (CAC)

Automatic Routing Management

• Automatic end-to-end connection management mechanism

• Deterministically allocates bandwidth and routes VCs

autonomously over optimum network paths

• Automatic rerouting preserves service integrity during network

failures

Advanced CoS (Class of Service) Management

• Up to 16 class-of-service queues, with independent service

algorithms dedicated to each interface in the network

Optimized Bandwidth Management

• Dedicated queue- and rate-controlled servers for each VCC/

VPC

• Dynamic thresholding, providing fairness and more than

95 percent utilization

ATM-Frame Relay (FR) Service Interworking

• Provides transparent end-to-end connectivity, operating two

services on a single switch platform

Switched Virtual Circuits

• Signaling protocol per ATM Forum UNI Specification V.3.0

and V.3.1

• E.164/NSAP addressing per ATM Forum UNI

Specification V.3.1

• Support for Private Network-Network Interface (PNNI) per

ATM Forum PNNI Specification V.1.0

Fault Management and Reporting

• Compliant with Bellcore GR-253-CORE

Alarms

• Loss of Signal (LOS)

• Loss of Pointer (LOP)

• Loss of Frame (LOF)

• Loss of Cell Delineation (LOC)

• Alarm Indication Signal (AIS)

• Remote Defect Indication (RDI)

• Alarm integration up/down count

Performance Monitoring

• Performance monitoring provided for line, section, and path

• Bit Interleaved Parity (BIP) error detection

• Far-End Block Error (FEBE) count

• Unavailable Seconds (UAS)

• Errored Seconds (ES)

• Severely Errored Seconds (SES)

• Header Checksum (HCS) monitoring

Statistics

• ATM statistics collected on a per-VC basis

• Four levels of ATM-layer statistics collection provided

OAM

• Segment and end-to-end Operations, Administration and

Maintenance (OAM) loopbacks supported per Bellcore

TA-NWT-001248

• External OAM segment flows, consisting of segment loopback

cells per ATM Forum UNI Specification V.3.1 and ITU-T I.371

• Generation and detection of AIS and RDI OAM cells

• OAM cell generation and loopback facility supported for

diagnostics and self-test purposes

Network Management

• Management using Cisco Wan Manager

 software

• Simple Network Management Protocol (SNMP)-based

for configuration and statistics collection

• Graphical user interface

Summary of Contents for BPX-BXM-T3-12






Reviews: