buckets size
To configure the size of the buckets in which statistics are collected, use the
buckets size
command in SLA
profile statistics configuration mode. To return the
buckets size
to the default value, use the no form of this
command.
buckets size number
{
per-probe| probes
}
no buckets size number
{
per-probe| probes
}
Syntax Description
Specifies the size of each bucket. The number of probes that each buckets
may contain. The range is 1 to 100.
number
Probes span multiple buckets.
per-probe
Buckets span multiple probes.
probes
Command Default
1 probe per bucket is collected.
Command Modes
SLA profile statistics configuration mode (config-sla-prof-stat-cfg)
Command History
Modification
Release
This command was introduced.
Release 3.9.0
The
per-probe
keyword was deprecated.
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
A bucket represents a time period during which statistics are collected. All the results received during that
time period are recorded in the corresponding bucket. If aggregation is enabled, each bucket has its own set
of bins and counters, and only results received during the time period represented by the bucket are included
in those counters.
By default, there is a separate bucket for each probe. The time period is determined by how long the probe
lasts (configured by the
probe, on page 298
,
send (SLA), on page 311
, and
schedule (SLA), on page 307
commands). This command allows you to modify the size of buckets so that you can have more buckets per
probe, or fewer buckets per probe (fewer buckets allows the results from multiple probes to be included in
the same bucket).
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
163
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
buckets size
