5-10
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
OL-16973-01
Chapter 5 Installing and Removing Exterior Components
Installing or Removing the Rear Side Exterior Components
Removing the Exhaust Grille
This section describes how to remove the exhaust grille (see
).
Prerequisites
There are no prerequisites for this task.
Required Tools and Equipment
You need the following tool to perform this task:
•
ESD-preventive wrist strap
Steps
To remove the exhaust grille, follow these steps:
Step 1
Attach the ESD-preventive wrist strap to your wrist and connect its leash to an ESD connection socket
on the rear side or a bare metal surface on the chassis.
Step 2
While facing the rear side of the chassis, firmly grasp the top outside edges of the exhaust grille.
Step 3
Pull the top of the grille firmly away from the chassis; it loosens from the connecting ball studs.
Step 4
Slide the hooks at the bottom of the grille free of the cutouts at the bottom of the chassis casing.
Step 5
Carefully set the exhaust grille aside.
