Cisco ASR 1001, Hardware Installation Manual

Page: 662 / 702

Cisco ASR 1002 Router Auxiliary Port Signals and Pinouts
Unless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco
ASR 1002 Router specifications listed in this section. Note
The following table lists the pinout of the dual RJ-45 ports for the auxiliary port signals.
Table 113: Auxiliary Port Pinouts for Cisco ASR 1002 Router
Description Direction Signal Pin
Request to Send Output RTS 1
Data Terminal Ready
(always On) Output DTR 2
Transmit Data Output TXD 3
Ring Indicator — RI 4
— — GND 5
Receive Data Input RXD 6
Data Set Ready/Data
Carrier Detect Input DSR/DCD 7
Clear to Send Input CTS 8
Cisco ASR 1002 Router BITS Port Signals and Pinouts
The following table lists the pinout of the front panel Building Integrated Timing Supply (BITS) RJ45 port.
Table 114: BITS RJ-45 Interface Pinouts for Cisco ASR 1002 Router
Description Direction Signal Pin
Receive Ring Input RX Ring 1
Receive TIP (T1/E1) Input RX TIP 2
Not used — N/C 3, 4
Not used — TX Ring 5
Not used — TX TIP 6
Cisco ASR 1000 Series Router Hardware Installation Guide
628
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1002 Router Auxiliary Port Signals and Pinouts