
2-4
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-03
Chapter 2 Overview: Cisco ASR 1000 Series Aggregation Services Routers SIPs
Identifying Slots and Subslots for SIPs and SPAs
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 07091401 12.2(33r)XN2
1 07091401 12.2(33r)XN2
2 07091401 12.2(33r)XN2
R0 07082312 12.2(33r)XN2
Specifying the SIP Subslot Location for a SPA
SIP subslots begin their numbering with “0” and have a horizontal orientation, as shown in the “SIP and
SPA Product Overview” chapter of the
Cisco ASR 1000 Series Aggregation Services Routers SIP and
SPA Software Configuration Guide
.
The Cisco ASR 1000 series SIP supports four subslots for the installation of SPAs. As shown in
, the subslot locations are oriented as follows:
•
SIP subslot 0—Top-left subslot
•
SIP subslot 1—Top-right subslot
•
SIP subslot 2—Bottom-left subslot
•
SIP subslot 3—Bottom-right subslot
Note
In the Cisco ASR 1002 Router, SIP subslot 0 is not available for SPA insertion. It is the slot that is used
for the integrated Route Processor and Gigabit Ethernet ports.
shows the SPA numbering sequence on a Cisco ASR 1000 Series Routers SIP.
Figure 2-2
Cisco ASR 1000 Series SIP SPA Numbering
The SIP subslot numbering is indicated by a small numeric label beside the subslot on the faceplate.
Just as with the SIPs, some commands allow you to display information about the SPA itself, such as
show diag subslot
. These commands require you to specify both the physical location of the SIP and
SPA in the format,
slot
/
subslot
, where:
•
slot
—Specifies the chassis slot number in the Cisco ASR 1000 Series Routers where the SIP is
installed.
•
subslot
—Specifies the slot of the SIP where the SPA is installed.
To display the operational status for a SPA installed in the SIP, enter the
show platform
command.
Router#
show platform
Chassis type: ASR1006
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1000-SIP10 ok 2d21h
0/0 SPA-2X1GE-V2 ok 2d21h
0/1 SPA-2X1GE-V2 ok 2d21h
SPA 0
SPA 1
SPA 2
SPA 3
Front of SIP, horizontal chassis slots
231508