manualshive.com logo in svg

Cisco ASA 5508-X, Configuration Manual

The Cisco ASA 5508-X Configuration Manual is an essential tool for users seeking to optimize their firewall settings. This comprehensive manual covers every aspect of the ASA 5508-X's configuration process, enabling users to maximize its performance. Download this manual for free at manualshive.com to unlock the full potential of your Cisco ASA 5508-X.

Share
Download
background image

 

3-6

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 3      Access Control Lists

  Configure ACLs

Configure ACLs

The following sections explain how to configure the various types of ACL, Read the section on ACL 
basics to get the big picture, then the sections on specific types of ACL for the details.

•

Basic ACL Configuration and Management Options, page 3-6

•

Configure Extended ACLs, page 3-7

•

Configure Standard ACLs, page 3-13

•

Configure Webtype ACLs, page 3-14

•

Configure EtherType ACLs, page 3-17

Basic ACL Configuration and Management Options

An ACL is made up of one or more access control entries (ACEs) with the same ACL ID or name. To 
create a new ACL, you simply create an ACE with a new ACL name, and it becomes the first rule in the 
new ACL.

Working with an ACL, you can do the following things:

•

Examine the ACL contents and determine line numbers and hit counts

—Use the 

show 

access-list

 

name

 command to view the contents of the ACL. Each row is an ACE, and includes the 

line number, which you will need to know if you want to insert new entries into an extended ACL. 
The information also includes a hit count for each ACE, which is how many times the rule was 
matched by traffic. For example:

hostname# 

show access-list outside_access_in

 

access-list outside_access_in; 3 elements; name hash: 0x6892a938

access-list outside_access_in line 1 extended permit ip 10.2.2.0 255.255.255.0 any

(hitcnt=0) 0xcc48b55c 

access-list outside_access_in line 2 extended permit ip host

2001:DB8::0DB8:800:200C:417A any (hitcnt=0) 0x79797f94 

access-list outside_access_in line 3 extended permit ip user-group LOCAL\\usergroup 

any any (hitcnt=0) 0xb0f5b1e1 

•

Add an ACE

—The command for adding an ACE is 

access-list

 

name

 [

line

 

line-num

] 

type

 

parameters

. The line number argument works for extended ACLs only. If you include the line 

number, the ACE is inserted at that location in the ACL, and the ACE that was at that location is 
moved down, along with the remainder of the ACEs (that is, inserting an ACE at a line number does 
not replace the old ACE at that line). If you do not include a line number, the ACE is added to the 
end of the ACL. The parameters available differ based on the ACL type; see the specific topics on 
each ACL type for details.

•

Add comments to an ACL (all types except webtype)

—Use the 

access-list

 

name

 [

line

 

line-num

] 

remark

 

text

 command to add remarks into an ACL to help explain the purpose of an ACE. Best 

practice is to insert the remark before the ACE; if you view the configuration in ASDM, remarks 
will be associated with the ACE that follows the remarks. You can enter multiple remarks before an 
ACE to include an expanded comment. Each remark is limited to 100 characters. You can include 
leading spaces to help set off the remarks. If you do not include a line number, the remark is added 
to the end of the ACL. For example, you could add remarks before adding each ACE:

hostname(config)# 

access-list OUT remark - this is the inside admin address

hostname(config)# 

access-list OUT extended permit ip host 209.168.200.3 any

hostname(config)# 

access-list OUT remark - this is the hr admin address

hostname(config)# 

access-list OUT extended permit ip host 209.168.200.4 any

Summary of Contents for ASA 5508-X













































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASA 5508-X

National Instruments NI 9147 Getting Started Manual preview
NI 9147
Brand: National Instruments Pages: 14
Goldstar MC-993A Adjustment Instructions Manual preview
MC-993A
Brand: Goldstar Pages: 36
Yeong Yang YY-R226 Technical Instruction preview
YY-R226
Brand: Yeong Yang Pages: 4
Patton electronics ForeFront 6276 User Manual preview
ForeFront 6276
Brand: Patton electronics Pages: 51
Supermicro Supero SC832 User Manual preview
Supero SC832
Brand: Supermicro Pages: 34
Supermicro SC815 series User Manual preview
SC815 series
Brand: Supermicro Pages: 54
ETAS ES4100.1 User Manual preview
ES4100.1
Brand: ETAS Pages: 30

Brands by name

Popular brands

Load more brands